S80 L6-2.9L VIN 92 B6294S2 (2004)
Release the upper catches using a weatherstrip tool. Lift out the control module.
Note! Check that the control module's connectors are intact.
Installing the passenger door module (PDM)
Press the control module into place.
Install:
-
the connectors
-
the nut and screw
-
the door panel, see Replacing the front door side panel See: Doors, Hood and Trunk/Doors/Front Door/Front Door Panel/Service and
Repair/Replacing the Front Door Side Panel.
Ordering software
Order software for the passenger door module (PDM) according to the table below.
Finishing
Initialize the window position in the communication input.
Interior Lighting and Upper Electronic Module (UEM), Replacing
Interior lighting and upper electronic module (UEM), replacing
Replacing the lens and the bulb