S80 L6-2.9L VIN 92 B6294S2 (2004)
Install:
-
the outer cover
Note! Ensure that the guide channels along the edges of the outer cover are correctly aligned on the inner cover.
-
the 4 screws.
Fold down the armrest on the center console.
Insert center console, replacing
Removing the insert from the center console
Remove:
-
the cover over the 12 volt socket on the rear edge of the center console. Insert a weatherstrip knife in the lower edge and pry off
-
the 2 screws and the panel for the 12 volt socket
-
the screw holding the insert at the rear edge.