S80 L6-2.9L VIN 92 B6294S2 (2004)
Seat Cover: Service and Repair
Rear Seat
Upholstery Back Rest, Replacing
Upholstery back rest, replacing
Note! To carry out this work a zip fastener is required. This is not included in the upholstery but is ordered separately. 6 mm zip fastener part
number: 3533976 is used and in some cases zip fastener 4 mm, part number: 9459316
Replacing backrest upholstery 1
Remove:
-
the backrest. See Backrest
-
the centre armrest / integrated child seat. See Center arm rest/integrated child seat See: Interior Moulding / Trim/Arm Rest/Service and Repair.
Take out and open the zip fastener lock.
Remove:
-
the edge trim panel in the opening for the hatch for long loads
-
release from the hatch opening by bending the tongues upwards.
Replacing backrest upholstery 2
Remove:
-
the central head restraint. See Center head restraint
-
the central head restraint sleeves. See Central head restraint sleeves
-
the hatch for long loads. See Lock the hatch for long loads
-
the outer head restraint. See Outer head restraint .
Remove the 7 half moon clips at the bottom edge of the backrest.
Open the other zip fastener.
Remove all half moon clips from the reverse of the upholstery.
Slide off the upholstery.
Installation
