S80 L6-2.9L VIN 92 B6294S2 (2004)
-
Ignition off
-
Disconnect connector from the seat heater module.
Check the cable between fuse 11C/8 terminal #2 (25A) and seat heater (9/12) for left seat and (9/13) for right seat connector terminal #1. Check for a
short-circuit to ground.
Remedy as necessary.
Other information:
-
To connect the breakout box, see Connecting the breakout box See: Body Control Systems/Testing and Inspection/Pinout Values and Diagnostic
Parameters/Connecting the Breakout Box/Connecting the Breakout Box, Central Electronic Module (CEM)
-
For information about signals, see Signal specification See: Body Control Systems/Testing and Inspection/Pinout Values and Diagnostic
Parameters/Signal Specification
-
Checking wiring and terminals See: Testing and Inspection/Component Tests and General Diagnostics/Checking Wiring And Terminals.