S80 L6-2.9L VIN 92 B6294S2 (2004)
Check brake disc friction surfaces.
If the brake disc displays signs of out-of-true, check its lateral run out. See Brake disc rear, calibrating. See: Brake Rotor/Disc/Testing and
Inspection/Brake Disc Rear, Calibrating
Replace the brake disc if it displays signs of heavy wear, variable thickness or similar. To replace, see Brake disc rear, replacing See: Brake
Rotor/Disc/Service and Repair/Brake Disc Rear, Replacing.
Note! Minimum recommended disc thickness / replacement limit = 10.0mm. Minimum recommended disc thickness when installing new brake
pads = 10.7mm.
Installation
Lubricating the sliding surfaces