S80 L6-2.9L VIN 92 B6294S2 (2004)
Turn the brake disc. Use a socket wrench to help.
Note the dial gauge run-out. Brake disc lateral run-out must not exceed 0.040 mm.
If lateral run-out exceeds the value, replace the brake disc.
To replace the brake disc, see: Replacing front brake discs See: Service and Repair/Replacing Front Brake discs.
Finishing work
Remove the test equipment
Install the caliper holder and the brake caliper. Use new screws on the caliper holder. Tighten to: 100 Nm.
Install the wheel
Installing wheels See: Maintenance/Wheels and Tires/Wheels/Service and Repair.
