S80 L6-2.9L VIN 92 B6294S2 (2004)
Remove the protective cap from the bleed nipple.
Connect the collecting bottle hose.
Press down the brake pedal fully. Keep it pressed down for approximately 2 seconds before releasing it. Repeat this until new brake fluid enters.
Close bleed nipple when the brake pedal is fully depressed.
Remove:
-
the hose and install the protective cap
-
the collecting bottle.
Install the brake calliper
See Brake pads rear, replacing See: Disc Brake System/Brake Pad/Service and Repair/Brake Pads, Rear.
Finishing work
See Replacing the brake fluid (using a bleeding unit) See: Replacing the Brake Fluid (Using A Bleeding Unit).