S80 L6-2.9L VIN 92 B6294S2 (2004)
Transfer the brake fluid reservoir to the new master cylinder.
Check that there is no dirt in the terminals.
Lubricate the O-rings and any hoses with brake fluid or glycerin.
Note! Do not use a soap solution or mineral oil to lubricate the hoses. Use brake fluid or glycerin.
Install:
-
the brake fluid reservoir from directly above -
-
the screw on the underneath of the brake fluid reservoir. Tighten. See: Tightening torque See: Specifications/Tightening Torque.
Installing the brake pipes