S80 L6-2.9L VIN 92 B6294S2 (2004)
-
Cut away a section of the soundproofing at the A-post (the shaded area in the illustration).
-
Take the short flanged screw and the bracket from the kit
-
Install the bracket. Use the screws in the existing weld nut as illustrated. Do not tighten fully yet
-
Turn the bracket to maintain a distance of 45 mm between one corner of the bracket and the centre of the hole for the lower ground screw. See the
illustration
-
Tighten the screw.
-
Partially fold the carpet back over the bracket
-
Make a hole in the carpet opposite the upper mounting hole in the bracket using a double ended scriber.
