S80 L6-2.9L VIN 92 B6294S2 (2004)
-
Take a screw and the passenger compartment socket from the kit. Tighten the passenger compartment socket to the bracket in the upper mounting
-
Insert the double ended scriber into the lower mounting for the passenger compartment socket. Make a hole in the carpet opposite the lower hole
on the bracket
-
Tighten the lower mounting for the passenger compartment connector socket. Use a screw from the kit.
-
Press a locking sleeve from the kit onto the passenger compartment socket. Slide the locking sleeve as far along the terminal for the passenger
compartment socket as possible
-
Cut a slit in the carpet just in front of the locking sleeve. Use a carpet knife. Make the cut as long as the diameter of the locking sleeve.
Note! Do not damage wiring or hoses under the carpet.
-
Remove the passenger compartment connector socket from the bracket. Fold the carpet to one side.
-
Raise the car
-
Remove the screw (1) from the left air baffle (2) for the front brake
-
Pull the left air baffle backwards. Remove the left air baffle
-
Remove the right air baffle in the same way.