S80 L6-2.9L VIN 92 B6294S2 (2004)
-
Press the cable for the passenger compartment connector socket into the clamp.
-
Insert the radiant heat protection (1) from the kit onto the cable for the passenger compartment connector socket
-
Thread the radiant heat protection up to the clamp on the power steering bracket
-
Adjust the length of the radiant heat protection up to the lead-in the cowl panel. Cut to a suitable length
-
Secure the radiant heat protection in position. Use two tie straps (2) from the kit.
-
Insert the cable for the passenger compartment connector socket through the rubber grommet into the passenger compartment
-
Lubricate the rubber grommet to facilitate inserting the cable. Use low temperature grease (P/N 1161417-9).