volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Passenger Compartment Connector Socket|Page 4312 > < Passenger Compartment Connector Socket|Page 4310
Page 23
background image

-

Remove the sill trim panel by pulling it away completely at the rear edge until the clips there have released. Continue forwards until the remaining
clips have released.

Applies to cars with two rows of seats

-

On cars with two rows of seats, the seat cannot be pushed forward. To remove the sill trim panel, start by folding the backrest forward as the sill
trim panel is pulled away at the rear edge. Following which, move the backrest back to raise the seat cushion, and so increase space for removing
the sill trim panel. It is secured firmly, so ensure that the sill trim panel and adjoining components are not damaged during removal.

Illustration A

Applies to cars with two rows of seats

-

Remove the two centre floor hatches by lifting them slightly and then pulling them away from their mountings at the front edge. If the rear centre
floor hatch is equipped with grocery bag holder on the underside then the floor hatch is secured with a belt on each short side of the storage box.
These must be detached.

-

Remove the storage box.

Illustration B

Applies to cars with three rows of seats and integrated carrier bag holder on the underside of the centre floor hatch

Passenger Compartment Connector Socket|Page 4312 > < Passenger Compartment Connector Socket|Page 4310