S80 L6-2.9L VIN 92 B6294S2 (2004)
Engine Torque Strut: Service and Repair
Replacing the Engine Torque Bracket
Replacing the engine torque bracket
Removal
Removing the torque bracket
Note! As the illustrations in this service information are used for different model years and / or models, some variation may occur. However,
the essential information in the illustrations is always correct.
Remove
-
the engine stabilizer brace
-
the charge air pipe (only turbocharged (TC) engines)
-
the screw for the dip stick pipe (6 cylinder automatics only)
-
the oil filler cap
-
the cover over the ignition coils
-
the torque bracket.
Installation
Installing the torque bracket