S80 L6-2.9L VIN 92 B6294S2 (2004)
Remove:
-
the clamps holding the cable harness to the rear edge of the cylinder head.
-
the camshaft position sensor housing and trigger wheel.
-
the cover at the rear edge of the intake camshaft.
-
the air pre-heating hose
Remove the screws holding the ignition coils and the two ground terminals between the ignition coils.
Unplug the connectors of the variable valve timing solenoid and the coolant temperature sensor.
Lift up and put the ignition coils with cable harness to one side.
Note! Mark up the ignition coils before removal.
Automatic only:
Remove the upper screw of the transmission dipstick tube.
Remove:
-
the ground strips between the engine and the firewall
-
torque rod bracket.
-
the upper engine coolant hose for the engine and radiator
Removing the manifold