S80 L6-2.9L VIN 92 B6294S2 (2004)
-
the upper timing cover
-
expansion tank. Connect the connector to the engine coolant level sensor
-
the hose to the expansion tank from the radiator. Tighten the clamp.
Install:
-
the servo oil reservoir. Ensure that the hoses are correctly positioned
-
the air cleaner (ACL) housing assembly
-
the connectors of the mass air flow sensor and electronic throttle module (ETM).
Tighten the clamp holding the hose between the electronic throttle body (ETM) and the air cleaner housing.
Install:
-
the air cleaner housing's intake pipe to the connection in the front cover plate.
-
the engine stabilizer brace between the suspension turrets.
Clamp the servo hose to the right mounting on the cross stay.
-
the plastic nuts for the hatch in the right fender liner
-
the right front wheel. See Installing wheels See: Maintenance/Wheels and Tires/Wheels/Service and Repair.
-
the battery negative lead. Also read Battery, disconnecting See: Starting and Charging/Battery/Service and Repair/Procedures/Battery,
Disconnecting.
Checking and filling media
Change the oil and replace the oil filter as necessary.
Check:
-
the engine oil level
-
the servo oil level
-
the coolant level.
Warm up the engine until the thermostat opens.
Check:
-
the engine for leaks
-
the fluid level in the transmission
-
the coolant level.
Top up as necessary.
