S80 L6-2.9L VIN 92 B6294S2 (2004)
Separate the quick-release fuel line connector. See Fuel line, lock See: Powertrain Management/Fuel Delivery and Air Induction/Fuel Rail/Service and
Repair.
Use tool 951 2666 Replaced by 9997298 See: Tools and Equipment/951 2666 Replaced by 999 7298.
Remove:
-
the screw securing the mounting for the dip stick pipe to the intake manifold
-
the connectors for the injectors
-
the screws for the fuel rail.
Spray universal oil or similar around the injector terminals on the intake manifold.
Gently work the fuel rail and injectors loose.
Put the fuel rail to one side.
Note! Handle the injector valves carefully to avoid damaging the injector valves' nozzles with needles.
Removing the intake manifold, lower section
Remove:
-
the upper screws
-
the outer screws from the lower row.
Slacken off the remaining screws.
Lift up and remove the lower section of the intake manifold.
Replacing gasket
