volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Bi-Xenon Lamps, Replacing|Page 23192 > < Bi-Xenon Lamps, Replacing|Page 23190
Page 3
background image

-

Switch off the ignition

-

Set the switch for external lighting to zero

-

Remove the front turn signal lamp. See Turn signal lamps, replacing See: Turn Signals/Turn Signal Lamp/Service and Repair 

-

Remove the headlamp wiper arm and the headlamp wiper motor. See Wiper arm and wiper motor, headlamp, replacing See: Wiper and Washer
Systems/Headlamp Wiper Motor/Service and Repair 

-

Remove the bumper casing on the relevant side. Remove the clips above the grille. See Casing, bumper front, replacing See: Body and
Frame/Bumper/Front Bumper/Front Bumper Cover / Fascia/Service and Repair/Casing, Bumper Front, Replacing 

-

Carefully pry the casing down and out. Remove the innermost and the outermost screws for the headlamp

-

Remove the uppermost screws from the headlamp

-

Remove the headlamp.

Note! Completely remove the bumper cover when removing both headlamps.

If there are misting problems in the headlamp. See If misting problems arise See: Testing and Inspection/Symptom Related Diagnostic Procedures.

Bi-Xenon Lamps, Replacing|Page 23192 > < Bi-Xenon Lamps, Replacing|Page 23190