S80 L6-2.9L VIN 92 B6294S2 (2004)
Carefully remove the overflow pipe from the reservoir.
Remove the thin hose (999 5721 Adapter See: Tools and Equipment/999 5721 Adapter ) from the heavy duty hose. Connect the thin hose to the overflow
pipe. Use a hose clamp.
Pump until a lot of air comes out.
Open the left fuel tank unit. Insert the heavy duty hose and suck out the remains from the bottom of the left-hand side of the fuel tank.
Installation
Right fuel tank unit:
-
Place the overflow pipe approximately half a centimeter to the left-hand side
-
Grip the right fuel tank unit reservoir. Pinch the fuel tank unit reservoir so that the float is held in its lowest position
-
Lower the reservoir carefully while rotating it backwards around the front-rear shaft on the float
-
Install the overflow pipe on the reservoir.