S80 L6-2.9L VIN 92 B6294S2 (2004)
Remove:
-
the screw in the mating flange of the intake manifold
-
the crankcase ventilation hose from the underneath of the upper section of the intake manifold.
When removing and installing the intake manifold:
Lift off the upper section of the intake manifold.
When replacing the gasket:
Turn the upper half of the intake manifold to one side.
Remove the gasket.
Hint: Cover the gasket face on the lower half of the intake manifold to prevent dirt getting in. Use broad tape.
Removing the fuel rail