volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Negative Lead, Battery, Replacing|Page 11803 > < Negative Lead, Battery, Replacing|Page 11801
Page 8
background image

Warning! The ignition must be in position II during installation.Then reconnect the battery negative cable. Ensure that no one is sitting in the
car when the battery is being connected.

Engine

-

If the battery has been disconnected, it may be necessary to drive the car for a few minutes to ensure correct operation.

Fan

-

If the car is equipped with Manual (MCC) or Standard climate control, the blower fan speed must be recalibrated if the battery has been
disconnected.

-

Ignition on.

-

Turn the blower fan switch to maximum.

-

Turn the blower fan switch to minimum.

Sun roof

-

The sun roof must be closed.

-

Press the sun roof switch so that the sun roof is in the tilt position.

-

Release the switch.

-

Press the button again for at least five seconds.

-

Release the switch.

The calibration is complete.

Reconnect the battery negative cable

Install:

-

The battery negative cable.

Negative Lead, Battery, Replacing|Page 11803 > < Negative Lead, Battery, Replacing|Page 11801