S80 L6-2.9L VIN 92 B6294S2 (2004)
Install the four nuts and the screw holding the steering gear. Use new nuts and a new screw. Tighten to 50 Nm.
Right-hand drive:
Install nut (A) holding the lower half of the collision protection system. Tighten to 50 Nm.
Install the oil pipes. Use new O-rings.
Install the collision protection system over the steering gear (2 screws).
Tighten to 80Nm.
Installing the cable harness for the heated oxygen sensors (HO2S)