S80 L6-2.9L VIN 92 B6294S2 (2004)
Note! Lift the sill edges so that the rear axle is free.
Remove:
-
the exhaust system from the three-way catalytic converter (TWC) and backward. See Exhaust system, replacing See: Engine, Cooling and
Exhaust/Exhaust System/Service and Repair
-
the propeller shaft from the viscous coupling.
Disconnecting the components for the final drive
-
Disconnect the connector from the control module for Active on Demand Coupling
-
Detach the cable harness from the sub-frame.
Removal
Removing the brake caliper
Release the parking brake adjuster. See Handbrake, brake shoes, replacing See: Brakes and Traction Control/Parking Brake System/Parking Brake
Shoe/Service and Repair/Hand Brake, Brake Shoes, Replacing
Remove (on both sides):
-
the wheel
-
the ABS sensor and the ABS line from the bracket on the wheel spindle
-
the brake caliper mounting screws.
Hang up the ABS line and the brake caliper. Use a piece of wire.
Removing the brake cable for the parking brake