volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Replacing the Front Sub-Frame|Page 15798 > < Replacing the Front Sub-Frame|Page 15796
Page 4
background image

-

the fuel line for the engine block heater and the engine block heater (if applicable) on the left side of the sub-frame.

-

the hose for the EVAP canister in the joint by pulling apart the hose. Route the hose under the anti-roll bar. (Does not apply to Diesel).

Remove:

-

the mounting for the exhaust pipe on the bracket

-

the screws holding the exhaust pipe bracket. Disconnect the brake pipe from the snap fasteners on the bracket

-

the bracket.

Replacing the Front Sub-Frame|Page 15798 > < Replacing the Front Sub-Frame|Page 15796