volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Replacing the Front Sub-Frame|Page 15807 > < Replacing the Front Sub-Frame|Page 15805
Page 13
background image

Bevel Protactor.

Note! Use new screws and new nuts.

-

the fender liner and the splash guard with both the plastic nuts.

-

the four nuts and screws holding the steering gear. Use new nuts and new screws. Tighten to 50 Nm

Clip the cable in position.
nut (A), holding collision protection lower half. (Applies only to right-hand drive cars). Tighten to 50 Nm.

Replacing the Front Sub-Frame|Page 15807 > < Replacing the Front Sub-Frame|Page 15805