S80 L6-2.9L VIN 92 B6294S2 (2004)
Install:
-
the M6 screw for the locating pin and the brake disc
-
the brake caliper. Use new screws. See Tightening torque See: Brakes and Traction Control/Specifications/Tightening Torque
-
the ABS sensor, 1 x M6.
-
the ABS line on the holder on the wheel spindle.
Tightening the drive shafts
Install the M10 screw for the drive shaft. Tighten. See Tightening torque See: Steering/Specifications/Mechanical Specifications/Tightening Torque.
Install the wheels. See Installing wheels See: Wheels and Tires/Wheels/Service and Repair.
Align the wheels. See Wheel alignment, checking / adjusting See: Alignment/Service and Repair.
Finishing
Installing the mudguards