S80 L6-2.9L VIN 92 B6294S2 (2004)
Apply a little petroleum jelly to the sensor O-rings.
Install the solenoid.
Note! The small guide lug on the solenoid should be upwards on installation.
Twist and press in the solenoid so that it bottoms against the control system
Install:
-
the spring clamp. Check that the spring clamp is locked
-
the connector.
Installing the side cover on the transmission
See Installing the gearbox side cover See: Service and Repair/Removal and Replacement/Automatic Transmission Components/Installing the Gearbox
Side Cover