S80 L6-2.9L VIN 92 B6294S2 (2004)
Note! Ensure that mating surfaces are clean.
Note! Use lint free paper.
Lift and turn the pump slightly so that it is centered on the pump shaft.
Finger-tighten the screws. The two upper screw heads (206) are sized 10 mm. The other screw heads (207) are 8 mm.
First tighten the screws crosswise to light contact.
Tighten the upper screws. Tighten to 16 Nm. Tighten the other screws. Tighten to 12 Nm.
Installing the side cover on the transmission
Install the side cover. See Installing the gearbox side cover See: Service and Repair/Removal and Replacement/Automatic Transmission
Components/Installing the Gearbox Side Cover.
Filling with transmission fluid
Fill with transmission fluid. See Transmission oil / oil filter, replacing See: Fluid - A/T/Service and Repair/Removal and Replacement.
Test drive the car.