S80 L6-2.9L VIN 92 B6294S2 (2004)
Ensure that the rubber seal is in position.
Install the cable clamps around the cable harnesses and the rubber seal.
Connect the connector to the transmission
See Temperature sensor, transmission fluid, replacing See: Transmission Temperature Sensor/Switch/Service and Repair
Install the air cleaner (ACL) housing
See Brake pipe master cylinder / ABS unit, replacing See: Brakes and Traction Control/Hydraulic System/Brake Hose/Line/Service and Repair/Brake
Pipe Master Cylinder / ABS Unit, Replacing
Checking diagnostic trouble codes (DTCs)
Check and erase any diagnostic trouble codes (DTCs).
AW55-50 Transmission