S80 L6-2.9L VIN 92 B6294S2 (2004)
Tighten the screws. Tighten to 25 Nm.
Plug in the connector from the car.
Ensure that the rubber seal is in position in the upper section of the connector.
Install the air cleaner (ACL) housing
See Brake pipe master cylinder / ABS unit, replacing See: Brakes and Traction Control/Hydraulic System/Brake Hose/Line/Service and Repair/Brake
Pipe Master Cylinder / ABS Unit, Replacing
Top up the transmission fluid
Note! After replacing the transmission oil, the "Transmission oil change" counter must be reset. See Resetting Transmission fluid change
counter, AW55-50/51SN, AW50/51 AWD, 4T65EV-GT See: Testing and Inspection/Programming and Relearning/Resetting the Transmission
Fluid Change Counter
Checking diagnostic trouble codes (DTCs)
Check and erase any diagnostic trouble codes (DTCs).
