S80 AWD V8-4.4L VIN 85 B8444S (2008)
-
Locate the light brown connector. It originates from the same cable harness as the connector for cargo compartment lighting.
-
Connect the connector to the control module.
Reinstall:
-
the side panels.
-
the sill trim panel.
-
the floor carpet.
-
Fold up the backrest.
Installing sensors
-
Check which holder is to be positioned where before installing. The two middle holders are the same whilst the two outer holders are specific.
-
Apply two pieces of tape to each holder.
-
Remove the protective film from the tape.