S80 AWD V8-4.4L VIN 85 B8444S (2008)
-
Clean the surfaces under the tail lights with isopropanol. Wipe dry.
Note! The adapter cable A was included in a previous version of the kit for the parking camera.The adapter cable B was included in a later
version of the kit for the parking camera.Both versions are suitable for all cars.
Illustration A
-
Connect the previously routed cable harness connector (1) to the right-hand connector on the control module.
-
Take the adapter cable A/B from the kit and connect the large green connector to the socket on the control module, as illustrated.
-
Connect the connector (2) on the pre-routed, taped cable harness for the power supply under the left-hand tail lamp, to the corresponding
connector on the adapter cable.
-
Take the long remaining cable harness from the kit and connect the end with the gray connector (3) to the connector in the middle of the control
module.
-
Clamp the adapter cable's remaining connector using the tie strap from the kit.
Figure B shows adapter cable A
Figure C shows adapter cable B