S80 AWD V8-4.4L VIN 85 B8444S (2008)
-
Press the Velcro strips on to the cleaned surfaces on the parking assistance camera (PAC).
Note! The adapter cable A was included in a previous version of the kit for the parking camera.The adapter cable B was included in a later
version of the kit for the parking camera.Both versions are suitable for all cars.
Figure A shows adapter cable A
Figure B shows adapter cable B
-
Connect the previously routed cable harness connector to the right-hand connector on the control module (1).
-
Take the adapter cable A/B from the kit and connect the large green connector to the socket on the control module, as illustrated.
-
Connect the connector (2) on the pre-routed cable harness for the power supply to the corresponding contact on the adapter cable.
-
Take the long remaining cable harness from the kit and connect the end with the gray connector (3) to the connector in the middle of the control
module.