S80 AWD V8-4.4L VIN 85 B8444S (2008)
-
Press the TRM module onto the control module securely, as illustrated.
-
Connect the remaining green connector (1) on the adapter cable for the power supply to the corresponding socket in the TRM module.
-
Connect the remaining gray connector (2), which was removed from the TRM module.
Part 3
Park Assist, camera (Continued)
Steps 70-71 only apply to cars with adapter cable B for the power supply
-
Route the long ground lead in the adapter cable to the right-hand side of the rear harness.
-
Connect the cable to the lower of the ground screws and tighten the screw with 10 Nm (7.5 lb.ft.)