volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Park Assist, Camera|Page 14497 > < Park Assist, Camera|Page 14495
Page 37
background image

-

Reconnect the battery negative lead

-

Program the software in accordance with the service information in VIDA.

Applies to cars with chassis number 0-47999

Download the software from the DVD (purchased separately):

1. Connect the battery charger if the battery voltage is less than 12V.
2. Turn on the ignition (push and hold the starter button).
3. Start NAVI.
4. Insert the disc in the navigation system's DVD player, after which the installation starts.
5. Press ENTER when asked:

1. "New SW found

current SW: v0855
new SW: v0856
continue"

1. The download takes about 10 minutes and is completed with the following message.

"The disc in the DVD player can not be read. Please check the disc. If this happens again please have the system inspected at your nearest
workshop."

2. Reinsert the map disc.
3. Check that the download was successful.

-

Press BACK

Select "Settings"
Select "System options"
Select "About"
SW version should be 0856 or later

Note! If the car already has the latest software installed the following text is displayed:"The disc in the DVD player can not be read. Please
check the disc. If this happens again please have the system inspected at your nearest workshop."

Park Assist, Camera|Page 14497 > < Park Assist, Camera|Page 14495