S80 AWD V8-4.4L VIN 85 B8444S (2008)
-
Press the six cable holders on the longitudinal flange of the bumper casing.
Installing the bumper
-
Lift up the bumper and connect the connector.
-
Press the bumper's hooks in at the rear edge. Press all the hooks for the ends into the body.
-
Reinstall the screws on the front edges of the bumper casing.
-
Reinstall the plastic nuts at the lower edge.
Installing the switch
-
Press the panel in at the front edge.
-
Lift the panel at the rear edge and remove it.