S80 AWD V8-4.4L VIN 85 B8444S (2008)
-
Press the secondary catch into the connector.
-
Plug the grey connector into the trailer module (TRM).
-
Take the ground screw from the kit and secure the ground lead to the ground terminal in the rear crossmember. Torque tighten the screw,
tightening torque: 10 Nm (7.5 lb.ft.)
-
Clamp up the cable harness at the existing cable harness using two tie straps from the kit.
Checking the 7-pin connector
Note! The trailer module (TRM) must be programmed with software in order to function correctly.
