S80 AWD V8-4.4L VIN 85 B8444S (2008)
-
Pry the catches to one side around the lower grille and press out towards the radiator.
-
Take the grille out.
-
Carefully pry up the tabs on the upper and lower side of the sensor holders using a small screwdriver, so that the catches on the sensor release and
the sensor can be pulled out.
-
Carefully press in the catches on the lower and upper side of the sensor holder and press out.
-
Repeat steps 9-10 for the sensor on the other side.
-
Remove the grille. It will not be used again.
