S80 AWD V8-4.4L VIN 85 B8444S (2008)
-
Take the ball holder, ball, washer, nut, lock bolt and locking pin from the kit.
-
Insert the ball holder in the towball's square bracket until the holes in the ball holder and square bracket correspond.
-
Slide the locking bolt into the hole.
-
Lock the other side using the locking pin.
-
Position the ball in the hole on the ball holder.
-
Install the washer and nut. Torque tighten to 244 Nm (180 lbf.ft.).
Storing the towball