volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Brake Disc Front, Checking|Page 8167 > < Brake Rotor/Disc|Specifications
Page 1
background image

Brake Rotor/Disc: Testing and Inspection
Brake Disc Front, Checking

Brake disc front, checking

Note! Some variation in the illustrations may occur, but the essential information is always correct.

Removal

Note! Removal steps in this procedure may contain installation details.

Remove the brake caliper.  Refer to: Front brake caliper See: Brake Caliper/Service and Repair/Front Brake Caliper.

999 7104 Clamp ring See: Tools and Equipment/999 7104 Clamp Ring.
Make sure that the contact surfaces of the brake disc and clamping ring are clean. Fit the screws, but only tighten slightly.
Tighten crosswise to 90 Nm. 981 4031 Torque socket 19 mm  See: Tools and Equipment/981 4031 Torque Socket 19 mm 

Brake Disc Front, Checking|Page 8167 > < Brake Rotor/Disc|Specifications