S80 AWD V8-4.4L VIN 85 B8444S (2008)
-
Tighten the timer relay to the subframe in the existing hole with screw, washer and nut. The washer must be located between the timer relay and
the subframe.
-
Pull the timer relay's ground lead along the existing heater cable to the front socket. Secure the cable, it is to be connected together with the ground
lead from the front socket.
-
Tighten the ground lead in the existing screw.
Illustrations A, B and C
-
Route the cable on along the existing cable and clamp it with tie straps from the kit.
