S80 AWD V8-4.4L VIN 85 B8444S (2008)
>
Fuel tank
8.
Removing lines from the fuel tank
When removing the fuel tank, lower the tank 200-300 mm (8 to 12 inches) and disconnect the remaining lines and terminals from the top of the
tank.
9.
Remove the fuel pump and level sensor unit from the tank, see:
>
Removal, replacement and installation
>
Engine with mountings and equipment
>
Fuel system
>
Fuel pump and strainer
>
Fuel pump and filter
>
Fuel pump and level sensor unit
Note!
Remove the fuel pump assembly only after disconnecting all hoses and connectors as per VIDA.
10.
Exposing opening
Carefully insert the entire bunch of hoses and cables back into the tank so that the opening for the fuel pump is exposed.
This is to obtain the best possible access for work in steps 11 and 12.
11.
Removal of the fuel line
Unhook the fuel filter's holder (1) and release the hose (2) from the holder.
Reinstall the holder for the fuel filter.
12.
Installation of cable tie
