S80 AWD V8-4.4L VIN 85 B8444S (2008)
At the end of the information list of components, where, with the help of the component designation, you can read off the name of the component, for
example, 3/2 = light switch.
List of type numbers
The list shows which type of component that respective type numbers refer to, for example, 3/x = switch, 6/x = electric motor, etc.
1
Battery
2
Relay
3
Switch
4
Control module
5
Driver Information Module
6
Electric motor
7
Sensor
8
Actuator
9
Heating element
10
Light
11
Fuse
15
Electrical distribution rail/box
16
Audio
17
Service/diagnostics
18
Contact reel
19
Meter
20
Ignition component/shunt
27
Optics
31
Ground connection
73
Branching point
74
Connector
B. Branching points
The wiring diagrams contain numbered branching points, for example 73/5035.
This informations contains a section with a list of branching points. This list shows all the components which are connected to each branching point.
The location of the branching points is shown in the "Cable harness routing in vehicle" in Vehicle Level Harness Locations images.
C. Connectors
Connectors provide a bridge between two cable harnesses and are described in the "Connectors" in Vehicle Level Connector Views.
D. Electrical distribution
Operation of the fuses and relays is shown in the "Electrical distribution" section.
E. Data communication Today's cars contain CAN, LIN and MOST networks that transfer information. Connections to these networks are not shown in
their entirety in the respective wiring diagram. Complete information on CAN, LIN and MOST communication is found in the "Control modules" in the
Information Bus.
F. Abbreviations
A number of different abbreviations are used here. These are explained in the "Wire Color Code and Other Abbreviations".
G. Component location The end of the manual contains a section that describes component appearance and location in numerical order.
3/39 Clutch Pedal Contact