S80 AWD V8-4.4L VIN 85 B8444S (2008)
Seat Occupant Sensor: Technical Service Bulletins
Air Bag Systems - Occupant Weight Sensor Installation
NO: 88-44
DATE: 4-3-2007
MODEL: S40, V50, C70, S60, S80, V70, XC70, XC90
M. YEAR:
C30 2007-->
S40 2004.5-->
V50 2005-->
C70 2006-->
S60 2006-->
S80 2006
S80 2007--> (All New S80)
V70 2005-->
XC70 2005-->
XC90 2005-->
SUBJECT:
Occupant Weight Sensor (OWS) Installation Installation
This Tech-Net Note supersedes the previous TNN 88-44 dated 8-21-2006. Please update your files.
DESCRIPTION:
The hose between the Occupant Weight Sensor (OWS) bladder and pressure sensor must not get twisted, kinked, pinched, stuck under the spring wires
or otherwise restricted during installation of the OWS spare part kit. Incorrect installation may lead to calibration problems and related Diagnostic
Trouble Codes (DTCs):
S40, V50, C70, C30
SRS-0112, STS-0114
S60, S80*, V70, XC70, XC90
SRS-0250, SRS-0258
S80**
SRS-B00A054
*) MY 2006
**) MY 2007
SERVICE:
When installing an OWS spare part kit, make sure that the hose between the OWS bladder and pressure sensor is not twisted, kinked, pinched, stuck
under the spring wires or otherwise restricted. Follow the instructions below in addition to the instructions in VIDA.
Repair > Removal, replacement and installation > 8 Body and interior > 85 Interior > Front seat, driver's seat, front seat > Occupant weight sensor
(OWS), replacing
Information > Parts > Parts catalog > 8 Body and interior > 85 Interior > 852 front seat, drivers seat, seat bench type > Front seat padding, panels
Note:
Photos show MY2007 S80 installation. Installations in other car models are similar and the same principles apply.
1.
OWS spare part kit and seat frame.