S80 AWD V8-4.4L VIN 85 B8444S (2008)
-
Install the pins for the cable ends into the connector as illustrated.
1. Blue (BL)
2. Black (SB)
3. Violet (VO)
4. White (W)
5. Yellow (Y)
6. Green (GN)
-
Slide the connector's catch back.
-
Take the long cable from the kit and connect it to the connector which has just been prepared.
-
Place the connector in the holder.
-
Route the cable harness between the sill and carpeting.
-
Route the cable harness under the side cushion, on the outside of the mounting for the seat belt and under the backrest's lower mounting. Then
follow the car's cable harness backwards.
-
Secure the it with a tie strap (1).
