S80 AWD V8-4.4L VIN 85 B8444S (2008)
INTRODUCTION
-
NOTE! Read through the whole installation instruction before starting the work.
-
The illustrations display the procedure in order of operation. The order of operation is repeated in the text section
Parking assistance, rear
Note! During installation, the car and components must maintain a temperature of at least +20° C (68° F).
Preparations
-
Take out four sensors and four holders. Clean the surfaces of the holder (1) and sensors (2) using a cleaning wipe, P/N 9192678. Allow to dry.
-
Apply a thin layer of activator, P/N 8637076, to the cleaned surfaces. Allow to dry for at least 10 minutes.