S80 AWD V8-4.4L VIN 85 B8444S (2008)
-
temperature-/pressure sensor as above
-
The O-ring from the throttle valve seat in the coupling housing.
Installation
Note! For tightening torques, see Specifications. See: Differential Lock/Control Unit/Service and Repair/Active On-Demand Coupling Module,
TF-80SC, M66
Components which are included in the kit and must be replaced
Temperature-/pressure sensor with O-ring.
Washer.
O-ring for the throttle valve seat.
Installing the included components
Install:
-
Differential electronic module (DEM)
-
the seal plate
-
the washer
-
the throttle plate with the O-rings
-
temperature-/pressure sensor with the O-rings
-
the screws.
The O-ring for the throttle valve seat is installed separately.
Placing the sealing plate in the control module