volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Customer Interest:|TJ22837 > < Engine Controls - MIL ON/Misfire, Leak Detection DTC's
Page 2
background image

DTC

Text
CSC = Customer Symptom Code
DTC = Diagnostic Trouble Code

Note!

If using a printed copy of this Retailer Technical Journal, first check for the latest online version.

DESCRIPTION:

The Malfunction Indicator Lamp (MIL) may be illuminated and Diagnostic Trouble Code (DTC) for misfire detection and fuel vapor leak detection may
be posted.

PRODUCT MODIFICATION:

An improved calibration is available as a service software for vehicles built up to structure week 2010w19. See chassis ranges above.

SERVICE:

First fault trace the DTCs according to VIDA. If no other faults are found perform an Engine Control Module (ECM) Upgrade according to VIDA. It is
important to note that this software will not remedy actual misifres. It is only correcting false detections. If a misfire / rough idle / long cranking exists
fault tracing for the symptom must be followed in order to remedy the fault before the ECM Upgrade is performed.

VOLVO STANDARD TIMES GUIDE (VSTG) INFO:
Operation number 36004-2 - Software control module downloading - See VSTG

- Claims may be submitted under the new car warranty when there is a documented customer complaint using claim type: 01

- Labor times are valid at the time of release and are subject to change.

Customer Interest:|TJ22837 > < Engine Controls - MIL ON/Misfire, Leak Detection DTC's