S80 FWD L6-3.2L VIN 98 B6324S (2010)
disturbed and DTC CEM B113187 is set.
The fault will not occur once the wiper has been activated during present driving cycle.
PRODUCT MODIFICATION:
The CEM software has been optimized.
*SERVICE:
If the symptom has been identified:
Reset the Wiper Motor Module by removing the fuse F9 - 11B9 for 10 seconds.
install the fuse.
Then perform a CEM upgrade.
SW P/N for 124135 and 136: 30786042.
SW P/N for 156: 31270560.
Test the wiper function with wiper stalk activated before starting the car.
*Service info has been updated.
VOLVO STANDARD TIMES GUIDE (VSTG) INFO:
OPERATION NUMBER: 36004-2 Software Download.
"See VSTG for time"
-
Claims may be submitted under the new car warranty when there is a documented customer complaint using claim type: 01
-
Labor times are valid at the time of release and are subject to change.
