S80 FWD L6-3.2L VIN 98 B6324S (2010)
Please update your files.
DESCRIPTION: One or both keys are not accepted by the vehicle, leading to a no start condition. DTC CEM (Central Electronics Module)-B10D794
may also be set, which indicates that the SCU (Start Control Unit) is not able to read the transponder inside the key within the predefined time. If the
vehicle is within the chassis range shown in the header, the symptom is most likely due to electro magnetic interference caused by the chrome plated
ignition lock bezel and not the SCU itself.
PRODUCT MODIFICATION: A new SCU bezel with a non metallic coating has been introduced into production.
SERVICE: Replace the ignition lock bezel according to the attached instructions.
Involved Parts
Panel/LHD P/N 9123403
VOLVO STANDARD TIME GUIDE OPERATION NUMBER:
99686-2 Column lock starter switch panel (SCU) replace as per TJ 21487
Time allowance 0.6hrs
- Claims may be submitted under the new car warranty when there is a documented customer complaint using claim type: 01
- Labor times are valid at the time of release and are subject to change