S80 T6 L6-2.9L Turbo VIN 91 B6294T (2002)
Note! On certain models the electrical cable for the antenna amplifier may be pre-routed. Check first to see if the electrical cable has been
pre-routed. Check if a black cable has been routed under the right-hand side tail lamp. Check if there are two black electrical cables routed to
the two-pin connector on the right-hand side of the rear edge on the radio.
-
If there is no black electrical cable pre-routed under the right-hand side tail lamp, carry out related points below.
-
If a black electrical cable is pre-routed under the right-hand tail lamp and only one black electrical cable has been routed to the two-pin connector
on the right-hand side of the rear edge on the radio, carry out related points and secure the old cable
-
If there are two black electrical cables in the two-pin connector on the right-hand side of the rear edge on the radio but no black electrical cable is
pre-routed under the right-hand tail lamp, carry out applicable points. Remove the right-hand (looking towards the front of the car) of the two
cables from the connector. Clamp this cable to secure it
-
If there are two black electrical cables in the two-pin connector on the right-hand side of the rear edge on the radio and a black electrical cable is
pre-routed under the right-hand tail lamp, carry out related point.
Interior preparations
